The CIRS Model 009 Cube 20 Phantom was designed for routine QA in RT and IMRT applications where ease of use and quick set-up are important.  The Cube 20 phantom is manufactured from Plastic Water® DT which faithfully mimics the linear attenuations of water within 1% from 50 keV to 15 MeV.  This enables complete QA from CT image acquisitions to therapy dose verifications.  The 20 cm cubic dimension was chosen as a suitable approximation for both head/neck and torso treatments.  All the edges are rounded to avoid CT artifacts.

Chamber, diode or MOSFET detectors are easily positioned at isocenter of the cube and laser alignment marks on all sides facilitate precise positioning of the phantom.* Detector position can be adjusted in 1 mm increments longitudinally and 5 mm increments for lateral and elevational adjustments.

Ready-Pac film can be inserted in the Cube.  By rotating the cube, the film is easily set in sagital, coronal or transverse orientations.

Stainless steel fiducials are clearly resolvable on CT images and leave small indentations on the film for precise film to plan registration.  Upon request, a recess can be milled in the interface surface for darkroom loading of radiographic film 5 x 6".

Features：

?Routine patient QA

?Beam constancy checks

?MLC QA

?User friendly set-up and positioning

?Suitable for head/neck and torso treatments

?Mimics water within 1%

*Customers are encouraged to complete their order with the purchase of the insert option listed below:

009RW-CVXX-XX - Water equivalent cavity block (Plastic Water® DT)

*NOTE: This product or an optional accessory of this product requires a CIRS dosimetry cavity code before an order can be placed. Please refer to the Dosimetry Cavity Codes document to identify the CIRS code for the probe you intend to use with this product.

• 1、技術溝通，初步判斷問題 電話與客戶進行初步溝通、了解并初步判斷儀器
  所出現的故障問題。
• 2、簽訂維修協議 由我公司向客戶發送儀器維修協議，客戶需如實
  填寫內容并回傳以便我司對儀器做進一步判斷。
• 3、客戶郵寄儀器 客戶可按照我司地址郵寄儀器，并將快遞單拍、
  照發送至您的專屬客服進行備案。
• 4、詳細診斷機器故障 我司收到郵寄儀器后會對郵寄的儀器進行拍照、
  并開箱檢驗，對儀器做進一步故障判斷。
• 5、支付維修費用 如客戶儀器在保修期內，我司不收取任何維修費，
  如客戶儀器在保修期外，我司會適當收取維修費。
• 6、郵寄儀器給客戶 我司將維修好的儀器按客戶地址進行拍照并郵寄，自此
  雖維修協議終止，但我司將提供終身免費答疑及技術指導。

專業從事儀器儀表檢修9年，部分可提供服務的產品型號如下：